Natural Neighbor Verification

Walks through the steps of Natural Neighbor interpolation to validate that the algorithmic approach taken in MetPy is correct.

Find natural neighbors visual test

A triangle is a natural neighbor for a point if the circumscribed circle of the triangle contains that point. It is important that we correctly grab the correct triangles for each point before proceeding with the interpolation.

Algorithmically:

1. We place all of the grid points in a KDTree. These provide worst-case O(n) time complexity for spatial searches.

2. We generate a Delaunay Triangulation using the locations of the provided observations.

3. For each triangle, we calculate its circumcenter and circumradius. Using KDTree, we then assign each grid a triangle that has a circumcenter within a circumradius of the grid’s location.

4. The resulting dictionary uses the grid index as a key and a set of natural neighbor triangles in the form of triangle codes from the Delaunay triangulation. This dictionary is then iterated through to calculate interpolation values.

5. We then traverse the ordered natural neighbor edge vertices for a particular grid cell in groups of 3 (n - 1, n, n + 1), and perform calculations to generate proportional polygon areas.

   Circumcenter of (n - 1), n, grid_location Circumcenter of (n + 1), n, grid_location

   Determine what existing circumcenters (ie, Delaunay circumcenters) are associated with vertex n, and add those as polygon vertices. Calculate the area of this polygon.

6. Increment the current edges to be checked, i.e.: n - 1 = n, n = n + 1, n + 1 = n + 2

7. Repeat steps 5 & 6 until all the edge combinations of 3 have been visited.

8. Repeat steps 4 through 7 for each grid cell.

import matplotlib.pyplot as plt
import numpy as np
from scipy.spatial import ConvexHull, Delaunay, delaunay_plot_2d, Voronoi, voronoi_plot_2d
from scipy.spatial.distance import euclidean

from metpy.interpolate import geometry
from metpy.interpolate.points import natural_neighbor_point

For a test case, we generate 10 random points and observations, where the observation values are just the x coordinate value times the y coordinate value divided by 1000.

We then create two test points (grid 0 & grid 1) at which we want to estimate a value using natural neighbor interpolation.

The locations of these observations are then used to generate a Delaunay triangulation.

np.random.seed(100)

pts = np.random.randint(0, 100, (10, 2))
xp = pts[:, 0]
yp = pts[:, 1]
zp = (pts[:, 0] * pts[:, 0]) / 1000

tri = Delaunay(pts)

fig, ax = plt.subplots(1, 1, figsize=(15, 10))
ax.ishold = lambda: True  # Work-around for Matplotlib 3.0.0 incompatibility
delaunay_plot_2d(tri, ax=ax)

for i, zval in enumerate(zp):
    ax.annotate(f'{zval} F', xy=(pts[i, 0] + 2, pts[i, 1]))

sim_gridx = [30., 60.]
sim_gridy = [30., 60.]

ax.plot(sim_gridx, sim_gridy, '+', markersize=10)
ax.set_aspect('equal', 'datalim')
ax.set_title('Triangulation of observations and test grid cell '
             'natural neighbor interpolation values')

members, circumcenters = geometry.find_natural_neighbors(tri, list(zip(sim_gridx, sim_gridy)))

val = natural_neighbor_point(xp, yp, zp, (sim_gridx[0], sim_gridy[0]), tri, members[0],
                             circumcenters)
ax.annotate(f'grid 0: {val:.3f}', xy=(sim_gridx[0] + 2, sim_gridy[0]))

val = natural_neighbor_point(xp, yp, zp, (sim_gridx[1], sim_gridy[1]), tri, members[1],
                             circumcenters)
ax.annotate(f'grid 1: {val:.3f}', xy=(sim_gridx[1] + 2, sim_gridy[1]))

Text(62.0, 60.0, 'grid 1: 3.746')

Using the circumcenter and circumcircle radius information from metpy.interpolate.find_natural_neighbors, we can visually examine the results to see if they are correct.

def draw_circle(ax, x, y, r, m, label):
    th = np.linspace(0, 2 * np.pi, 100)
    nx = x + r * np.cos(th)
    ny = y + r * np.sin(th)
    ax.plot(nx, ny, m, label=label)


fig, ax = plt.subplots(1, 1, figsize=(15, 10))
ax.ishold = lambda: True  # Work-around for Matplotlib 3.0.0 incompatibility
delaunay_plot_2d(tri, ax=ax)
ax.plot(sim_gridx, sim_gridy, 'ks', markersize=10)

for i, (x_t, y_t) in enumerate(circumcenters):
    r = geometry.circumcircle_radius(*tri.points[tri.simplices[i]])
    if i in members[1] and i in members[0]:
        draw_circle(ax, x_t, y_t, r, 'm-', str(i) + ': grid 1 & 2')
        ax.annotate(str(i), xy=(x_t, y_t), fontsize=15)
    elif i in members[0]:
        draw_circle(ax, x_t, y_t, r, 'r-', str(i) + ': grid 0')
        ax.annotate(str(i), xy=(x_t, y_t), fontsize=15)
    elif i in members[1]:
        draw_circle(ax, x_t, y_t, r, 'b-', str(i) + ': grid 1')
        ax.annotate(str(i), xy=(x_t, y_t), fontsize=15)
    else:
        draw_circle(ax, x_t, y_t, r, 'k:', str(i) + ': no match')
        ax.annotate(str(i), xy=(x_t, y_t), fontsize=9)

ax.set_aspect('equal', 'datalim')
ax.legend()

<matplotlib.legend.Legend object at 0x7f09d12f71c0>

What?….the circle from triangle 8 looks pretty darn close. Why isn’t grid 0 included in that circle?

x_t, y_t = circumcenters[8]
r = geometry.circumcircle_radius(*tri.points[tri.simplices[8]])

print('Distance between grid0 and Triangle 8 circumcenter:',
      euclidean([x_t, y_t], [sim_gridx[0], sim_gridy[0]]))
print('Triangle 8 circumradius:', r)

Distance between grid0 and Triangle 8 circumcenter: 25.30650398368644
Triangle 8 circumradius: 25.258767799971746

Lets do a manual check of the above interpolation value for grid 0 (southernmost grid) Grab the circumcenters and radii for natural neighbors

cc = np.array([circumcenters[m] for m in members[0]])
r = np.array([geometry.circumcircle_radius(*tri.points[tri.simplices[m]]) for m in members[0]])

print('circumcenters:\n', cc)
print('radii\n', r)

circumcenters:
 [[36.32995951 48.24358974]
 [21.         40.15277778]]
radii
 [24.35529419 20.73432492]

Draw the natural neighbor triangles and their circumcenters. Also plot a Voronoi diagram which serves as a complementary (but not necessary) spatial data structure that we use here simply to show areal ratios. Notice that the two natural neighbor triangle circumcenters are also vertices in the Voronoi plot (green dots), and the observations are in the polygons (blue dots).

vor = Voronoi(list(zip(xp, yp)))

fig, ax = plt.subplots(1, 1, figsize=(15, 10))
ax.ishold = lambda: True  # Work-around for Matplotlib 3.0.0 incompatibility
voronoi_plot_2d(vor, ax=ax)

nn_ind = np.array([0, 5, 7, 8])
z_0 = zp[nn_ind]
x_0 = xp[nn_ind]
y_0 = yp[nn_ind]

for x, y, z in zip(x_0, y_0, z_0):
    ax.annotate(f'{x}, {y}: {z:.3f} F', xy=(x, y))

ax.plot(sim_gridx[0], sim_gridy[0], 'k+', markersize=10)
ax.annotate(f'{sim_gridx[0]}, {sim_gridy[0]}', xy=(sim_gridx[0] + 2, sim_gridy[0]))
ax.plot(cc[:, 0], cc[:, 1], 'ks', markersize=15, fillstyle='none',
        label='natural neighbor\ncircumcenters')

for center in cc:
    ax.annotate(f'{center[0]:.3f}, {center[1]:.3f}', xy=(center[0] + 1, center[1] + 1))

tris = tri.points[tri.simplices[members[0]]]
for triangle in tris:
    x = [triangle[0, 0], triangle[1, 0], triangle[2, 0], triangle[0, 0]]
    y = [triangle[0, 1], triangle[1, 1], triangle[2, 1], triangle[0, 1]]
    ax.plot(x, y, ':', linewidth=2)

ax.legend()
ax.set_aspect('equal', 'datalim')


def draw_polygon_with_info(ax, polygon, off_x=0, off_y=0):
    """Draw one of the natural neighbor polygons with some information."""
    pts = np.array(polygon)[ConvexHull(polygon).vertices]
    for i, pt in enumerate(pts):
        ax.plot([pt[0], pts[(i + 1) % len(pts)][0]],
                [pt[1], pts[(i + 1) % len(pts)][1]], 'k-')

    avex, avey = np.mean(pts, axis=0)
    ax.annotate(f'area: {geometry.area(pts):.3f}', xy=(avex + off_x, avey + off_y),
                fontsize=12)


cc1 = geometry.circumcenter((53, 66), (15, 60), (30, 30))
cc2 = geometry.circumcenter((34, 24), (53, 66), (30, 30))
draw_polygon_with_info(ax, [cc[0], cc1, cc2])

cc1 = geometry.circumcenter((53, 66), (15, 60), (30, 30))
cc2 = geometry.circumcenter((15, 60), (8, 24), (30, 30))
draw_polygon_with_info(ax, [cc[0], cc[1], cc1, cc2], off_x=-9, off_y=3)

cc1 = geometry.circumcenter((8, 24), (34, 24), (30, 30))
cc2 = geometry.circumcenter((15, 60), (8, 24), (30, 30))
draw_polygon_with_info(ax, [cc[1], cc1, cc2], off_x=-15)

cc1 = geometry.circumcenter((8, 24), (34, 24), (30, 30))
cc2 = geometry.circumcenter((34, 24), (53, 66), (30, 30))
draw_polygon_with_info(ax, [cc[0], cc[1], cc1, cc2])

Put all of the generated polygon areas and their affiliated values in arrays. Calculate the total area of all of the generated polygons.

areas = np.array([60.434, 448.296, 25.916, 70.647])
values = np.array([0.064, 1.156, 2.809, 0.225])
total_area = np.sum(areas)
print(total_area)

605.2930000000001

For each polygon area, calculate its percent of total area.

proportions = areas / total_area
print(proportions)

[0.09984256 0.74062644 0.04281563 0.11671538]

Multiply the percent of total area by the respective values.

contributions = proportions * values
print(contributions)

[0.00638992 0.85616417 0.1202691  0.02626096]

The sum of this array is the interpolation value!

interpolation_value = np.sum(contributions)
function_output = natural_neighbor_point(xp, yp, zp, (sim_gridx[0], sim_gridy[0]), tri,
                                         members[0], circumcenters)

print(interpolation_value, function_output)

1.0090841476772403 1.009084244425604

The values are slightly different due to truncating the area values in the above visual example to the 3rd decimal place.

plt.show()